Skip to content

Waste ⋅ Energy ⋅ Filtration 

Industry Solutions – Industrial Waste

We are a family run firm, focusing on the Engineering and Monitoring of Process Equipment, especially in the Waste, Energy, and Filtration fields. We provide the complete vertical solution, including engineering and design services, product development, manufacturing, installation, equipment operation, and maintenance.

We place a strong emphasis on developing and providing the products and services that clients require, providing the best technological solution, and providing quality products and services.

Macrotec is certified to the following standards:

ISO 9001:2015 | Quality Management Systems
ISO 14001:2015 | Environmental Management Systems
ISO 45001:2018 | Occupational Health & Safety Management 

Types of industrial waste our incinerators can treat.

  • Mining waste
  • Chemical waste
  • Hazardous waste
  • Paint sludges
  • Oil sludges
  • Wood waste
  • Solvents
  • Vegetable oils
  • Ammunition

* For some waste types scrubbing and filtration will be required.


We design and manufacture a wide range of incinerators for various applications and conditions. Hazardous and other speciality waste types have always been a key focus area for us, along with the design of custom solutions.

Our incinerators have been designed to reduce every possible threat to the environment, while providing a reliable and cost-effective solution. We make use of advanced designs in our combustion plant, which regulates the combustion rate, temperature in the different chambers, turbulence, gas velocities and supply of oxygen.

All our incinerators are optimized to minimise emissions, with large combustion and settling chambers, high velocity combustion air, and high output burners. We also offer Incinerators with Filtration for units that must comply to EU emission regulations.

Industrial Waste

Our Incinerators are two chamber units, with auxiliary burners, combustion air fans, manual or auto feeder, and a stack. Optional items include: Manual and Auto feeders, Containerised Incinerators, Remote Monitoring and Support.

V150 Containerised Incinerator
Our Incinerators are available in three different types:

Standalone Incinerators
These are our standard incinerators that are used all over the world. These incinerators offer reliability, easy maintenance, low emissions, various feeding systems, and can handle multiple waste types.

Biomass Incinerator
These Incinerators use biomass to heat up and maintain the required temperature, with no diesel or gas required as an auxiliary fuel. Also available in an option that does not require electricity.

Incinerators with Scrubbing and Filtration
Our solution for ultra-low emissions, these incinerators are integrated with dry gas scrubbing, flue gas filtration, and heat recovery. These plants comply with South African and EU emission regulations.

Hot Water Systems

Our heat recovery systems provide cost effective methods to provide heating in remote or off the grid locations.

Heating can be done via electrical elements, heat pumps, or waste heat from chillers, compressors, or an incinerator. Multiple heating sources can be used for redundancy.

Our hot water systems are completely pre-installed on a skid and includes the control system as per client requirements. A monitoring system can be optionally added

Macrotec Hot Water Vessel with Control Panel

Heat Recovery

Our heat recovery systems provide cost effective methods to provide heating in remote or off the grid locations.

V100 Hot Water Assembly

Waste heat recovery options include:

  • Incinerators
  • Chillers
  • Compressors

To add redundancy to the system, a conventional heating source can also be added.

Equipment & Plantroom Monitoring

Our IIoT (industrial Internet of Things) platform allows you to easily monitor equipment and sensor data.

Our sensors allow Performance & Condition Monitoring of fans, motors, pumps, cooling and heating systems, and compressors. This allows you to optimise operation, reduce costs, and plan maintenance better to prevent unplanned downtime.

PLC Remote Maintenance Preview


We supply, install, and maintain a wide range Diesel, HFO, LPG, Natural Gas Burners, Waste Oil, and Dual Fuel burners and burner spares, along with Burner Management Systems. 

FGP Burner
FBR Burner
FBP Burner Spare


We supply, install, and provide complete solution engineering for Process and Condition monitoring systems. This includes a wide range of Process Sensors, Position Sensors, Flue Gas Sensors, Condition Monitoring instrumentation, and Industrial Gateways.

Maintenance & Repairs

With our site services team we offer complete maintenance solutions, including mechanical, electrical, electromechanical, and refractory work.